Bulk Screw, Washer & Plug Kit (Timber, Drywall and Plaster) 100 Pack
Covers a large green wall project end to end, so the job never stops halfway for another hardware run.
- Purpose-built accessoryDesigned to support artificial greenery installation, care or display.
- Low-maintenance by designArtificial greenery keeps the look without routine plant maintenance.
Why this product works
Product details & specifications
Designer Plants' Bulk Screw, Washer & Plug Kit is the recommended fixing pack for installing Designer Plants Artificial Vertical Garden and Green Wall panels onto timber, plaster, MDF, plastic, and composite substrates. The 3cm washer is purpose-sized to grip the panel backing and distribute load — preventing pull-through under panel weight while keeping the fixing point clean and architectural.
Each 2.7cm screw is sized to engage standard timber framing and most drywall installations. For thin timber substrates where the screw may protrude through, two washers can be stacked or the fixing repositioned into solid framing behind the surface. The 100-piece pack supplies sufficient hardware for approximately 10–15 standard 1m × 1m green wall panels at the recommended 6–10 fixings per panel.
A 100-piece installation kit — 2.7cm screws, 3cm washers, and wall plugs — engineered specifically for fixing artificial green wall panels to timber, plaster, MDF, and composite substrates.
Specifications
| Screw length | 2.7 cm |
|---|---|
| Washer diameter | 3 cm |
| Wall plug | Included — sized for masonry-adjacent applications |
| Quantity | 100 of each component (screws, washers, plugs) |
| Substrate compatibility | Timber, plaster, MDF, plastic, composite materials |
| Recommended density | 6–10 fixings per standard 1 m² green wall panel |
| Approximate coverage | 10–15 panels per 100-piece kit |
Where It Is Used
The standard fixing pack for Designer Plants green wall and vertical garden panel installations onto common interior and exterior substrates.
Timber-framed walls and feature backing. The most common green wall installation substrate. The 2.7cm screw engages framing or solid timber backing; the 3cm washer distributes load across the panel mesh.
Plasterboard and drywall. For plaster installations, the wall plug provides anchored grip without requiring framing access. Ideal for residential interior feature walls.
MDF and composite substrate. Studio walls, retail fit-outs, and event-build substrates where MDF or composite sheeting forms the green wall mounting surface.
Plastic and PVC sheeting. For temporary installations, retail displays, and event activations using plastic or PVC backing panels.
Installation
Pre-mark fixing points based on the panel layout — typically 6–10 points per 1m × 1m panel, distributed evenly across the panel and concentrated along edges. Position the screw through the washer and the panel backing, drive perpendicular to the substrate, and tighten until the washer sits firm against the panel without crushing the foliage backing. For thin timber substrates, ensure the screw engages a timber beam or use stacked washers to prevent over-penetration.
Why Designers and Commercial Operators Specify Designer Plants
Designer Plants holds a 5-star rating across more than 20,000 verified customer reviews and has delivered commercial-grade installations for clients including BMW, Disney, Aperol, Facebook, Coca-Cola, Westfield, Virgin Australia, and VicRoads. Trade pricing and wholesale accounts are available across the full range — including installation hardware, fixings, and accessories. Contact the team on 1800 617 341 or at sales@designerplants.com.au to discuss project requirements.
Frequently Asked Questions
How many fixings are needed per green wall panel?
Designer Plants recommends 6–10 fixings per standard 1m × 1m green wall panel — distributed evenly across the panel surface with denser fixing along edges and at panel-to-panel joins. The 100-piece kit covers approximately 10–15 panels at the recommended density.
What substrates is this kit designed for?
Timber framing, timber sheeting, plasterboard, MDF, plastic backing, and composite substrate materials. For cement sheet, blueboard, or masonry installations, the Cement Sheet & Blueboard Green Wall Screws are the appropriate fixing.
Will the 2.7cm screw protrude through thin timber substrates?
Possibly — in 19mm and thinner timber, the screw can protrude beyond the back face. Two stacked washers reduce the effective screw depth, or the fixing point can be repositioned to engage solid timber framing behind the substrate.
Are these fixings suitable for outdoor installations?
For sheltered outdoor installations (covered alfresco, balcony underside, awning protected), yes. For fully exposed outdoor positions, corrosion-resistant fixings are recommended — contact 1800 617 341 for outdoor-rated fixing options.
Does the kit include separate plugs for masonry?
Yes — wall plugs are included for plaster and adjacent applications. For full masonry, brick, or concrete installations, the cement sheet kit linked above is the more appropriate fixing.
Downloads & project resources
Shipping information
Free shipping threshold
Eligible Australian orders of $300.00 or more qualify for free standard shipping.
Tracked dispatch
Orders are dispatched with tracking from the appropriate Australian warehouse. The carrier is selected for the parcel size and destination.
Delivery timing
Transit time varies by destination and freight type. Available shipping options and any applicable charge are confirmed through checkout.
Large or urgent projects
For bulky orders, project freight or an urgent delivery requirement, contact the Designer Plants team before ordering.